AmazingScales - quality scales, balances and weighing equipment for every weighing need  
AmazingScales - quality scales, balances and weighing equipment for every weighing need
Home pageAbout Us / Store PoliciesView CartContact Us
AmazingScales.com Specials
Lab scales
Baby Scales
Bariatric Scales
Bathroom Scales
Blood Pressure Monitors
Body Fat Monitors
Counting Scales
Crane Scales
Educational Scales
Fishing Scales
Floor Scales
Force Testing
Food Service Scales
Heart Rate Monitors
Height Measurement
Industrial Scales
Jewelry Scales
Kitchen Scales
Legal for Trade Scales
Medical Scales
Pocket Scales
Retail Scales
Shipping Scales
Specialty Medical Scales
Veterinary Scalesamazingscales.com
Manufacturers

Acculab Scales

AND Weighing Scales
Best Weight Scales
CAS Scales
Chatillon Scales
Detecto Scales
DigiWeigh Scales
Dillon
HealthOMeter Scales
Easy Weigh Scales
Hoto Instruments
Imada Force Testing
Inscale Floor Scales Mark 10 force testing and torque testing equipment MedWeigh medical ScalesMettler Toledo® Scales
Minx Scales
Ohaus Scales
Polar Heart Rate Monitors
Salter Brecknell Scales
Sartorius Scales
SEca Scales
Siltec Scales
Tangent Scales
Tanita Scales

AmazingScales.com
800-832-0055

 
 
Chatillon Ametek scales and weighing equipment
 

Chatillon Scales > Chatillon Force Testing

Chatillon FCE Series Digital Functional Capacity Evaluator

Chatillon FCE Series Digital Functional Capacity Evaluator


Chatillon FCE Series Digital Functional Capacity Evaluator
(Includes SPK-DF handle and NC002825 grips for handle assembly)
Price: $1116.25
currently in stock
FREE Next Day Air Shipping
Shipping Weight: 6 lbs. (estimate shipping cost)

Quantity:  

MSCK Accessory Kit, Add
FCEK Accessory Kit, Add

 


Over 99% of items IN STOCK for Immediate Delivery! Lowest prices GUARANTEED!

The Chatillon FCE series is ideal for functional capacity evaluations. This compact, easy to use force gauge is designed for physical medicine, occupational medicine and sports medicine applications and general patient assessment in family, neurological and orthopedic practices.

Simplicity was a key design criteria for both clinicians and technicians. Measurement accuracy is better than 0.1% full scale. A large, easy to read, high resolution dot matrix LCD display supports a variety of measurements including functional capacity based on a force or a time duration. The gauge also displays normal and peak readings, pass / fail results and statistics based on up to 10 stored results. Measurements are displayed in ounces, grams, pounds, kilograms and Newtons units. The display can be inverted and displayed results may be "hidden" from the patient during testing.

The Chatillon FCE force gauge comes standard with carrying case, battery adapter / charger and NIST Certificate of Calibration with data. A variety of testing fixtures are optionally available. The FCE digital force gauge has been designated by the Food and Drug Administration (FDA) to be a Class 2 Medical Device.

Features:

  • FDA Class II Medical Device
  • Advanced Operating Modes
    • Functional Capacity - force based or time duration based
    • Normal
    • Peak Strength
  • Statistical Calculations
    • Mean with Maximum and Minimum values
    • Coefficient of Variation with Mean and Standard Deviation
    • Standard Deviation with Variance and Mean
    • % Differentiation
  • Integral Loadcells
    • Accuracy ±0.25% of full scale
    • Mechanical overload protection to 150% of full scale
  • Simple Operator Interface
    • High resolution dot matrix LCD display
    • Menus with prompts for ease of use
    • Dedicated and function keys with navigation pod
  • NIST Calibration with Data - IEC/ISO17025 Cert with Uncertainty is also available
  • 2 year warranty
Model Price ounces grams pounds kilograms Newtons
FCE-100 $1059.25 1600 x 0.2 50000 x 5 100 x 0.01 50 x 0.005 500 x 0.05
FCE-200 $1059.25 3200 x 0.4 - 200 x 0.02 100 x 0.01 1000 x 0.1
FCE-500 $1059.25 8000 x 1 - 500 x 0.05 250 x 0.02 2500 x 0.2

Specifications

  • Accuracy: ±0.25% of full scale ±LSC
  • Certification: calibration with NIST data, IEC/ISO17025 optional
  • Data Sampling Rate: 5000 Hz
  • Peak Capture Rate: 5000 Hz
  • Display Update Rate: 10 Hz
  • Tare Capacity: 10% full scale
  • Overload Protection: 150% full scale
  • Display Characteristics: high resolution, dot matrix LCD, 8 lines, 40 characters, adjustable contrast, invert and "hide" capability
  • Automatic Shut Down: configurable time. May be disabled.
  • Includes SPK-DF handle and NC002825 grips for handle assembly
  • Data Storage: 10 results, optional NEXYGEN software for unlimited storage and automated testing and analysis.
  • Outputs: RS-232, Mitutoyo (Digimatic) and ±2Vdc analog
  • Power: Battery or direct AC operation. Universal Power: 120V / 230V, Rechargeable nickel metal hydride (supplied), International Universal AC adapter.
  • Battery Life: 30 hours, continuous use. Gauge may be operated with direct AC power source
  • Instrument Weight: 1.5 lbs
  • FDA Classification: Class II Medical Device
  • Operating Temperature: 40 to 100 F (4 to 38 C)
  • Warranty: 2 years

Because you expect more from a Chatillon gauge...

Physical Medicine

Use the Chatillon FCE to accurately measure and document musculoskeletal strength. Evaluate individual muscle groups in flexion / extension, internal / external rotation, plantar flexion, dorsi flexion and abduction / adduction.

Sports Medicine

Objectively quantify an athlete's musculoskeletal force output. Evaluate and document the effectiveness of the training regiment and track the athlete's progress.

Occupational Medicine

Conduct job task analysis, ergonomic analysis and functional capacity testing with the Chatillon FCE. measure actual push, pull or lift forces to determine job task requirements. Then quantitatively evaluate the subject's ability to perform those job tasks. Help ensure that a person is ready to assume work after an injury or test to ensure that an operation meets ADA compliance guidelines.

Class II Medical Device

The FCE has been classified by the FDA to be a Class II Medical Device

Normal and Peak Modes

When used as a force measurement instrument, the FCE will display peak tension and compression loads. When in peak mode, the maximum force exerted during a test is displayed and may be stored for statistical comparisons or output to an external device using serial data communications. The size of the displayed information may be increased for easier viewing just by selecting a key on the keypad.

Normal and Peak Modes

Functional Capacity Evaluation

Two methods of determining functional capacity are standard with your FCE gauge. Functional capacity is useful to determine the functional stamina of a muscle group based on strength or time. It may be used to assess a subject's strength pre- and post conditioning or to evaluate a subject's strength after an injury.

Strength Method
This method allows you to define a strength threshold. The gauge will begin taking readings once the strength threshold has been reached and will continue to take and average readings until the measured strength value falls below the threshold value.

Load Method

Load Method

Time Method
The time method allows you to establish your strength averaging based on a strength threshold and time duration. The strength threshold determines the start of the averaging, while the time duration defines the length of the test period. The gauge will begin taking readings when the threshold is reached and will continue to take and average readings until the time duration has expired.

Statistical Results

You may save and store up to 10 results in instrument memory for later recall or to calculate statistical results when in Peak mode. The gauge labels each result and indicates memory capacity. The gauge will alert you when memory is full. Statistical results include:

  • Calculate Mean and also show you the MAX and MIN values for your calculation
  • Coefficient of Variation is calculated and displayed with the Mean and Standard Deviation value
  • Standard Deviation is calculated and displayed with the Mean and the Variance value. Total Population and Sample (n-1) methods are supported
  • Calculate and display percentage difference between consecutive test results.

Statistical Results

High and Low Load or Pass-Fail Limits

The FCE series gauge may be configured with High and Low Load Limits or Pass-Fail Limits. Load limits allow you to establish setpoints for your testing. If the gauge exceeds a setpoint value, the gauge can provide a visual and audible alarm. You can also set up the gauge to operate as a pass-fail system. You can set up a pass-fail limit based on a limit range or a nominal value with a percentage bandwidth. Based on your setup, the gauge will provide you with a Pass-Fail indication

Intuitive Operation

A large, easy to read dot matrix display displays up to 8 lines of information. The high resolution display features contrast adjustments and can be inverted when required. The display can even be "hidden" at the press of a button. A measurement bargraph indicates load and torque direction, measured load and torque and helps to prevent overloads. The sensors feature mechanical overload protection of 150% of full scale.

The rubber keypad features dedicated and dynamic function keys. The function keys correspond to displayed options and guide the user during operation. A navigation pod lets you navigate in the menus and to scroll and change values quickly. The innovative "i" key can be used to display critical information on the gauge such as gauge capacity and resolution, battery life, loadcell overload history, even service information including last calibration date, or the location of service centers.

Intuitive Operation

Simplified Setup

Menus and intelligent prompts make gauge setup fast and easy. Gauge options are presented in "List Format". Using the navigation pod and function keys, you simply select the functions and parameters required. The gauge will guide you through the setup process. Default settings are provided and a "Quick Reset" allows you to re-establish defaults with a single key press.

Simplified Setup

Self Diagnostics

The FCE series force gauge incorporates flash memory and hosts a set of self-diagnostic functions for monitoring the display, keypad and electronics. Using the "i" key, you have immediate access to battery conditions, including estimated battery life remaining. You can also view loadcell status, including the number or overloads that have been applied to the gauge. Zero offset verification is standard and a step by step calibration procedure is built in, allowing you to calibrate your FCE gauge with certified standards.

Accessory Kits

FCEK Accessory Kit Includes:

FCEK Accessory Kit

  • Price:
  • Soft Case fanny pack
  • Hook with Latch
  • Flat Disc with Rubber Pad
  • Curved Compression Fixture
  • V-Notch Adapter
  • Pistol Grip Assembly
  • Gasp Cable with Loops
  • 6 inch Extension Rod
  • 5/16-28 Thread Knurled Nut

MSCK Accessory Kit Includes:

MSCK Accessory Kit

  • Price:
  • Carrying Case
  • Hook with Latch
  • Flat Disc with Rubber Pad
  • 1 inch V-notch adapter
  • 5/8 inch V-notch adapter
  • Rectangular Compression Fixture, Large
  • Rectangular Compression Fixture, Small
  • Gasp Cable with Loops
  • 6 inch Extension Rod
  • Palm Fixture
  • 5/16-28 Thread Knurled Nut

Click here for Brochure
(Adobe PDF)

Get Adobe Acrobat Reader FREE


 
 

home | about us | checkout | contact us | store policies | site map | your account

Copyright 2004-2012 amazingscales.com

Site designed and maintained by MaxCubed Web Designs

 

 

Hot Deals!

Tanita KD-200 digital scale
Tanita KD-200 Digital Scale
Was $179.95
1000 x 1 g (0-35 oz x 0.05 oz) - now $79.95
2000 x 2 g (0-70 oz x 0.1 oz) - now $82.95
5000 x 5 g (0-11 lb x 2 oz) - now $84.95



Seca-700 mechanical physicians scale
Seca-700 Mechanical Doctor's Scale
500 lbs x 4 oz
Only $259.95


Click here for more specials!